40L - 60L Autoclave
Benchtop

UK brass fittings and copper tubing to assist in installation of Priorclaves.

Integral Steam Generator for fitting to steam heated Priorclaves. Capacity and electrical requirements differ by model. For top Loading Priorclaves this option increases the width by 300mm.

Automatically re-fills the autoclave chamber while the door is open ready for the next cycle. Requires a water supply. (Fitted as standard to electrically heated vacuum models)

Preparation of detailed IQ/OQ Documentation for testing purposes

Where the autoclave is to be installed at higher altitudes an adjustment can be made to the autoclave alarms and settings to adjust for the differences in measured air pressures. Two bands are available: elevations between 900 and 2,400 M (3,000 to 8,000 ft.) – (0.9 to 0.75 Bar pressure) and elevations between 2,400 and 7,000 M (8,000 to 23,000 ft.) – (0.75 to 0.40 Bar pressure).

Form X Pressure Test Certification – Individually witnessed Hydrostatic Test with stamped certificate. MUST be requested at time of purchase.

Electrically Heated Priorclaves require soft water with a conductivity of a minimum of 100 micro Siemens to work correctly. Various adaptations can be made to pipe work, fittings and water detection systems for Ultra pure water supplies if required.

Controls distortion of semi-rigid containers, pouches and blister-packs as the autoclave cools by pressurizing the autoclave chamber with air, balancing the internal pressure inside the containers, pouches or blister packs. In autoclaves with water cooling jackets it controls volume losses when rapidly cooling liquid loads. Requires an external air supply at a minimum pressure of 3 BarG.

Controls distortion of semi-rigid containers, pouches and blister-packs as the autoclave cools by pressurising the autoclave chamber with air, balancing the internal pressure inside the containers, pouches or blister packs. Includes a quiet running air compressor mounted, where possible, inside the autoclave body..

Protects sensitive loads from contamination from the outside air drawn in as the autoclave cools.

Factory Acceptance test carried out with the customer at Priorclave’s factory after manufacture and before dispatch.

Allows easy connection and integration to an internal computer network for remote monitoring and storage of records.

Backup thermostatic protection for the autoclave’s low water detection system.

A manually operated valve is fitted to allow the autoclave vessel to be drain for regular cleaning.

PIN number identification of operators for each cycle. This information is recorded in the autoclave cycle log.

Wooden Packing case for air or sea shipping. Fitted with shock and tilt indicators and the wood used is treated to ISPM15.

Improves reliability and operation of complex Priorclaves. The standard electrical valves are replaced with pneumatically operated valves. Requires an air supply or alternatively a small quiet air compressor can be installed inside the body of the autoclave.

Provides a temperature record of autoclave cycles independent of the autoclave control system onto a paper chart. Unless otherwise specified a fixed temperature probe is fitted. Multi-channel versions are also available.

Provides a temperature and pressure record of autoclave cycles independent of the autoclave control system. Cycle records are graphically displayed and saved to a log file. Unless otherwise specified a fixed temperature probe is fitted along with a pressure transducer. Further recording channels can be provided along with the option of an Ethernet port for connection to a computer network.

Provides a temperature record of autoclave cycles independent of the autoclave control system onto a paper chart. Unless otherwise specified a fixed temperature probe is fitted. Multi-channel versions are also available.

The autoclave is fitted with an external serial communication interface socket for connection to a suitable PC or laptop. The package includes a serial cable and software.

Tamper proofing of program settings for single program Priorclaves – Included on models fitted with multi-program memory options.

For Steam Heated autoclaves this allows the autoclave to continue to be used when external steam is not available.

Control and other valves required to supply a Steam Heated Priorclave with dry saturated steam at the correct pressure from an external steam supply. The autoclave is not fitted with this but if there is an existing steam supply set in place this can be used to supply the autoclave’s steam.

Provides an additional level of control protection. The Tactrol system scans all input channels to detect abnormalities and will abort the cycle with a displayed, logged and printed fault code and description if one is detected.

Free of charge replacement of parts for two years. (Consumable items and damage due to misuse or negligence are excluded)

Ion Exchange water softening system which provides water of the correct quality to run the Priorclave – requires regular refilling with salt to maintain water quality.